DESCRIPTION
Overview
This Kalamera door handle replacement is designed for built-in wine cooler models. The handle provides a comfortable grip for opening and closing the wine cooler door while adding an elegant finishing touch to your appliance. Withstand regular use.
Specifications
Type: Door handle
Function: Genuine replacement part
Brand: Kalamera
Compatible Models
Fits KRC-90SS,KRC-30SZB,
KRC-96BV-TGD,KRC-90BV,
KRC-24SZB,KRC-46DZB-R,
PH-150BV,KRC-150BV,
KRC-150CB,PH-150BCW,
KRC-40DZB,PH-180BCW,
KRC-66DZB,PH-150BF,KRC-150BV
Installation Notes
Remove the old handle by unscrewing the mounting bolts from inside the door. Install the new handle by inserting the mounting screws through the handle and tightening from inside the door panel. Ensure the handle is securely attached and properly aligned.
Important
Please verify your model number matches the compatibility list before ordering. If you are unsure which board your wine cooler requires, contact our customer support at email website@kalamera.com for assistance.
PARAMETER
Temperature Zones
Temperature Range
Capacity
Door Type
Configuration
Venting
Product Dimensions
Net Weight
Noise Level
Voltage
Input Power
INSTALLATION GUIDE
Installation Type
Built-in or freestanding — designed to fit your space.
Ventilation
- Built-in: Front-venting design requires no rear clearance. Also suitable for freestanding use
- Freestanding: Rear venting — allow adequate space behind the unit for airflow
Clearance
- Built-in models need no mandatory clearance for operation. Additional spacing recommended for easier installation and routine maintenance
- For built-in installation: leave at least 1/4" on each side and 1" behind for proper air circulation
Cutout & Cabinet Fit
- Follow the specified cutout dimensions to ensure smooth door swing and full shelf extension
- When installing between frameless cabinets, a 1/2" (12 mm) filler strip or side panel on the hinge side prevents door interference with adjacent cabinetry
Installation Steps
- Place the unit on a level surface and align with the specified cutout dimensions
- Verify alignment and spacing for smooth door operation and structural stability
- Connect to power
- Wait 24 hours before loading beverages to allow the refrigerant to fully settle
Important
- Do not tilt the unit more than 45° during transport
- Ensure the floor can support the unit's fully loaded weight