DESCRIPTION
Overview
This Kalamera door replacement is designed for 24-inch single-door wine cooler and beverage cooler models. The dual-pane tempered glass construction provides superior thermal insulation and UV protection — the double-layer tempered glass blocks harmful UV rays that can degrade wine quality, while the insulated air gap between panes minimizes temperature fluctuations to keep your collection at optimal conditions. This single door fits various Kalamera 24-inch built-in configurations.
Specifications
Width: 24 inches
Frame: Stainless steel
Glass: Dual-pane tempered glass with UV protection
Type: Single door for 24-inch models
Compatible Models
Fits KRC-24SZB,KRC-46DZB-R,PH-150BV,KRC-150BV,KRC-54SZB
Installation Notes
Support the door securely during installation. Ensure proper alignment with all hinge points. Check the door seal for complete contact around the perimeter after installation. Adjust hinges if necessary to achieve a tight seal.
Important
Please verify your model is a 24-inch single door unit and appears on the compatibility list before ordering. Contact website@kalamera.com if you need help confirming the correct door for your specific model.
PARAMETER
Temperature Zones
Temperature Range
Capacity
Door Type
Configuration
Venting
Product Dimensions
Net Weight
Noise Level
Voltage
Input Power
INSTALLATION GUIDE
Installation Type
Built-in or freestanding — designed to fit your space.
Ventilation
- Built-in: Front-venting design requires no rear clearance. Also suitable for freestanding use
- Freestanding: Rear venting — allow adequate space behind the unit for airflow
Clearance
- Built-in models need no mandatory clearance for operation. Additional spacing recommended for easier installation and routine maintenance
- For built-in installation: leave at least 1/4" on each side and 1" behind for proper air circulation
Cutout & Cabinet Fit
- Follow the specified cutout dimensions to ensure smooth door swing and full shelf extension
- When installing between frameless cabinets, a 1/2" (12 mm) filler strip or side panel on the hinge side prevents door interference with adjacent cabinetry
Installation Steps
- Place the unit on a level surface and align with the specified cutout dimensions
- Verify alignment and spacing for smooth door operation and structural stability
- Connect to power
- Wait 24 hours before loading beverages to allow the refrigerant to fully settle
Important
- Do not tilt the unit more than 45° during transport
- Ensure the floor can support the unit's fully loaded weight