DESCRIPTION
This 30-inch dual zone wine and beverage cooler combines 33-bottle wine storage with 100-can beverage capacity in one unit, featuring independent temperature control and blue LED lighting, making it the ideal combo cooler for kitchens, bars and home entertainment.
Seamless Built-in or Freestanding InstallationAt 22.4" D × 30.5" W × 33.9" H, this unit installs seamlessly under a counter or stands freely in any room. Front-venting design gives you the flexibility to place it wherever you need it — kitchen, home bar, or office break room.
PARAMETER
Temperature Zones
Dual Zone
Temperature Range
Left: 40°F–66°F / Right: 38°F–50°F
Capacity
33 bottles & 100 cans
Door Type
Dual-pane tempered glass with stainless steel frame
Configuration
Built-in or Freestanding
Venting
Front-venting
Product Dimensions
D22.34“×W30.45”×H33.85“
Net Weight
121 lbs
Noise Level
About 40 dB
Voltage
110V / 60Hz
Input Power
90W
INSTALLATION GUIDE
Installation Type
Built-in or freestanding — designed to fit your space.
Ventilation
- Built-in: Front-venting design requires no rear clearance. Also suitable for freestanding use
- Freestanding: Rear venting — allow adequate space behind the unit for airflow
Clearance
- Built-in models need no mandatory clearance for operation. Additional spacing recommended for easier installation and routine maintenance
- For built-in installation: leave at least 1/4" on each side and 1" behind for proper air circulation
Cutout & Cabinet Fit
- Follow the specified cutout dimensions to ensure smooth door swing and full shelf extension
- When installing between frameless cabinets, a 1/2" (12 mm) filler strip or side panel on the hinge side prevents door interference with adjacent cabinetry
Installation Steps
- Place the unit on a level surface and align with the specified cutout dimensions
- Verify alignment and spacing for smooth door operation and structural stability
- Connect to power
- Wait 24 hours before loading beverages to allow the refrigerant to fully settle
Important
- Do not tilt the unit more than 45° during transport
- Ensure the floor can support the unit's fully loaded weight